Loose Ring Snaffle with Copper Lozenge

The loose ring snaffle with copper lozenge is fast becoming a popular bit. Suitable for horses with large tongues or small mouths as the copper lozenge and double joint help to reduce the nutcracker action of a single jointed bit. This bit is very similar to the French link snaffle, but the smooth central lozenge gives a slightly more positive action on the tongue than the flat plate of the French link. The double joint is often favoured by horses as the lack of palate pressure makes the bit more comfortable and the pressure is evenly distributed across the tongue and bars of the mouth.

The ergonomically shaped copper lozenge is warm and encourages the horse to salivate and accept the bit. Made from stainless steel, which is the most common material used for horse bits, it is durable, easy to clean, tasteless and does not rust. Ideal for many horses and most equestrian disciplines.

Measurements
As per our size guide the A & B measurements of this bit are as follows:
A=16mm
B=65mm

Stainless Steel Horse Bits...
Stainless steel is the most commonly used material for horse bits as it is durable, easy to clean and does not rust. Some of our stainless steel bits feature copper mouthpieces which help to create a warming sensation and encourage the horse to salivate and accept the bit. Stainless steel bits are suitable for a wide range of horses and are available in many designs so that you can choose the right bit for your horse and discipline.

Pair your snaffle horse bit with one of ourAnatomical Bridles.

Please note, for reasons of health and hygiene this bit is non returnable if removed from the template.

• Loose ring cheeks
• Double jointed, stainless steel mouthpiece with copper lozenge
• Bit strength: Mild
• This bit is BD Legal

To promote good hygiene and protect the longevity of your horse bit we recommend the following care regimen after every use.

1. Rinse your bit after every use under a tap to remove any saliva or debris on the surface.

2. Use a soft sponge or cloth to wipe any excess debris off of the bit, paying particular attention to joins and hinges.

3. Leave to dry naturally.